Maintenance Instructions | REPLACING/REPAIRING |
REPLACING/REPAIRING
DANGER
To prevent accidental starting of the engine when replacing parts or repairing the machine, remove the key from the ignition switch and disconnect the spark plug wires.
IMPORTANT: ALWAYS use genuine factory replacement parts. Substitute parts CAN result in product malfunction and possible injury to the operator and/or others.
Drive Belts
There are four (4) individual belts on GHS models or three (3) belts on SD models:
•Engine PTO Drive Belt (3 Groove Power Band)
•Jackshaft Drive Belt
•GHS Blower Drive Belt (GHS Model Only)
•Hydrostatic Ground Drive Belt
The belts may be removed and replaced using the procedures described on the following pages.
59