Maintenance Instructions | REPLACING/REPAIRING |
REPLACING/REPAIRING
DANGER
To prevent accidental starting of the engine when replacing parts or repairing the machine, remove the key from the ignition switch and disconnect the electrical plug on the fuel
IMPORTANT: ALWAYS use genuine factory replacement parts. Substitute parts CAN result in product malfunction and possible injury to the operator and/or others.
Drive Belts
There are five (5) individual belts on GHS models or four (4) belts on SD models:
•Engine PTO Drive Belt (3 Groove Power Band)
•Jackshaft Drive Belt
•GHS Blower Drive Belt (GHS Model Only)
•Hydrostatic Ground Drive Belt
•Engine Fan Belt
The belts may be removed and replaced using the procedures described on the following pages.
Jackshaft |
|
|
Drive Belt | Engine |
|
| Engine | |
| PTO Belt | |
|
| Fan Belt |
Hydrostatic Ground
Drive Belt
GHS Blower Belt
(GHS Model Only)
Belt Locations
64