Maintenance Instructions | LUBRICATION/CLEANING |
3.Reinstall the lower drain plug, making sure the rubber
4.Refill the transmission through the air bleed plug hole until it is as full as possible.
IMPORTANT: Avoid fluid contamination when filling the reservoir. Use clean container, spout, funnel, etc. when pouring the fluid into the reser- voir.
5.Rotate the transmission input shaft about five (5) revolutions to allow any trapped air to escape.
6.Before installing the air bleed plug, fill the reser- voir with fluid allowing a small amount to leak out of the air bleed plug hole.
7.Install the air bleed plug and fill the reservoir to the COLD level line.
CLEANING
Engine Air Cleaner System
There are two main components in the engine air cleaner system: a turbine precleaner and a Donald- son Radialseal™ air cleaner. Each component is checked, cleaned and maintained on a different schedule based on the filtering action required. Each component is serviced as follows:
Donaldson Air
Cleaner Cover
Air Restriction
Gauge
Turbine Precleaner | Hose |
| |
| Clamp |
Vacuator™
Valve
Precleaner Tube | Air Cleaner | |
Safety Filter Cartridge | ||
| ||
Hose | Donaldson | |
Air Cleaner | ||
Clamp | ||
|
Air Intake
Hose
Hose
Clamp
Engine
Engine Air Cleaner System Components
55