Maintenance Instructions
ADJUSTMENTS
ADJUSTMENTS
Steering Levers
An adjustment range of approximately 3 in. (76 mm) is available on the steering levers - the levers can be adjusted forward or aft depending on the arm length of the operator. The levers can be adjusted by loosening the locknut at the pivot point and the locknut holding the lever in position in the adjustment slide. Adjust levers into most comfortable position and tighten both locknuts.
Adjustment
When the carrier frame hinge joint is properly adjust- ed, the deck lock levers should move in and out of the engaged and disengaged positions freely. Adjustments are made by loosening the jam nut and tightening or loosening the set screws on the Deck Mount Pivot Brackets. Retighten the jam nut when the adjustment is complete.
Jam Nut
Set Screw
Locknut
Slide
(Position)
Locknut
(Pivot Point)
Steering Lever Adjustment
85