Operating Instructions
CONTROL IDENTIFICATION, LOCATION, AND FUNCTION
CAUTION
Before operating the mower, become familiar with the location and function of all operator controls. Knowing the location, function, and operation of these controls is important for safe and efficient operation of the mower.
Ignition Switch
The ignition switch is located on the right front of the body and is used to start and stop the engine. The switch has three positions: “O” is the OFF position, RUN is the position the key returns to after starting, and “S” is the START position. When starting the engine, turn the key clockwise to the “S” position. Do not hold the key in the “S” position longer than 10
seconds. If the engine does not start, return the key to the “O” position for at least 60 seconds before making a restart attempt. Prolonged cranking can damage the starter motor and shorten battery life. Release the key when the engine starts, and it will return to the RUN position. To stop the engine, rotate the key counterclockwise to the “O” position.
OFF
ON
START
Ignition Switch
Steering Levers
Choke
(not visible)
Throttle
Parking Brake
Hourmeter
Forward Speed
Blade Clutch Control (FSC)
(PTO)
Ignition Switch
Operating Controls
24