General Information

HIGHLIGHTED INFORMATION

Walker Manufacturing recommends that any service requiring special training or tools be performed by an authorized Walker Mower Dealer. There are several general practices to be aware of in the area of safety. Most accidents associated with the operation or maintenance of a Walker product are caused by disregarding basic safety precautions or specific warnings. Such accidents, in most cases, can be prevented by being aware of the dangers present.

Information of special importance has been highlighted in bold type in this manual. Refer to Safety Instructions for the meanings of DANGER, WARN- ING, CAUTION, IMPORTANT, and NOTE.

GLOSSARY

There are many terms that are either unique to this equipment or that are used as acronyms. The following terms and their definitions will help while using this manual.

•FORWARD SPEED CONTROL (FSC) controls the maximum forward speed of the tractor; func- tioning as a cruise control.

•LEFT HAND (LH) refers to the left-hand side of the tractor when the operator is seated facing forward in the tractor seat.

•MACHINE consists of the snowblower installed on the tractor, functioning as a single unit.

•POWER TAKE-OFF (PTO) transmits engine power to run the snowblower.

•RIGHT HAND (RH) refers to the right-hand side of the tractor when the operator is seated facing forward in the tractor seat.

•TRACTOR is the prime mover, including the en- gine, drivetrain, operator seat, and controls to operate the snowblower.

IDENTIFYING NUMBER LOCATIONS

The snowblower serial number is stamped on the right side of the frame between the mounting tube and the foot trigger.

Model and serial numbers are helpful when obtaining replacement parts and maintenance assistance. For ready reference, please record these numbers in the space provided.

Snowblower Model No.

SB36

Snowblower Serial No. ___________________

Date of Purchase ________________________

Fill In By Purchaser

Serial Number

Snowblower Serial Number Location

(Top View)

1