Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
2.
1. | 3. |
4.
Location: Front Body Adjacent to RH Steering Lever
Part Number:
1.Warning – read Operator’s Manual before oper- ating the machine.
Warning – wear eye and ear protection when op- erating the machine.
2.Warning –
•Do not operate on slopes greater than 15 degrees.
3.Warning – thrown object hazard.
•Keep bystanders away from the machine when operating.
4.Warning – entanglement hazard.
•Keep all guards in place while engine is run- ning.
60 lb·ft (81 N·m)
1.
Location: Gearbox Cover
(Gear Drive Decks Only)
Part Number:
1.Tighten blade nuts on gear driven decks to 60 lb·ft (81 N·m).
1.
Location: Front Body, LH Side Above Muffler
Part Number:
1.Warning – carbon monoxide (CO) poisoning hazard.
•CO emitted by a running engine can be deadly.
•Do not operate indoors or in other enclosed areas.
Location: Instrument Panel
Part Number:
17