Maintenance Instructions | REPLACING/REPAIRING |
Jackshaft Drive Belt
1.To remove the jackshaft drive belt:
a.Remove the engine PTO drive belt, as described in previous section.
b.Relax the belt by depressing the spring- loaded idler arm.
c.Roll the belt off the jackshaft pulley and remove.
| Push Idler Pulley Down to Relax Belt |
| Idler Pulley |
Jackshaft |
|
Jackshaft | Engine |
Drive Belt | |
| Pulley |
| Tension Spring |
Jackshaft Drive Belt (Disengaged)
2.Reverse the removal procedure to replace the jackshaft drive belt.
Jackshaft | Idler Arm |
|
Engine
Pulley
Jackshaft
Drive Belt
Tension Spring
Jackshaft Drive Belt (Engaged)
73