4WATLOW Series 733/734 Service Manual Install & Wire, Chapter 1
Wiring
Figure 6 -
Series 733/734
Rear View.
9-pin
Event Input/
Output
Connector
12-pin
Output Wiring
Connector
Input/
Communications
Connector
How to Wire the Series 733/734
The Series 733/734 wiring is illustrated by model number option. Check the
terminal designation sticker on the control and compare your model number to
those shown here and also the model number breakdown on the inside back
cover of this manual.
When you apply power without sensor inputs on the terminal strip, the Series
733/734 display alternates parameter data and Er07 at a 3 second rate.
This error indicates an open sensor or A/D error. Remove power to the control
and connect the sensor properly. All wiring and fusing must conform to the
National Electric Code and to any locally applicable codes as well.
Use Figure 6 as a location reference when wiring your unit.