Wayne WAP75 operating instructions

Pool Pumps

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-

erty damage! Retain instructions for future reference.

Operating Instructions and Parts Manual Inground and Above Ground Units

To reduce the risk

of injury, do not

permit children to use this product

unless they are closely supervised at

all times.

This pump is for

use with perma-

nently installed pools. If specified, the

pump may be used with hot tubs and

spas. Do not use with storable pools.

A permanently installed pool is con-

structed in or on the ground or in a

building such that it cannot be readily

disassembled for storage. A storable

pool is constructed so that it may be

readily disassembled for storage and

reassembled to it’s original integrity.

Pump only clear water. Do

not pump flammable or

explosive fluids such as

gasoline, fuel oil, kerosene, etc. Do not

use in a flammable and/or explosive

atmosphere. Personal injury and/or

property damage could result.

All wiring must be per-

formed by a qualified elec-

trician. The pump must be

installed in compliance with all local

codes and the National Electrical Code.

2. Do not install within an outer

enclosure or beneath the skirt of

the hot tub or spa, unless so

marked.

Installation

LOCATION

Disconnect, tag and lock out

power source before

attempting to install, ser-

vice, relocate or perform any mainte-

nance.

Locate pump as close to pool/spa as

possible. Install the pump on a hard,

level surface that is dry, well ventilated

DANGER

WARNING

CAUTION

WARNING

321700-001 6/02

and away from direct sunlight. The sur-

rounding area should provide protec-

tion from the elements and ample

room for maintenance and service.

Ensure the drainage will flow away

from the pump.

Above ground pool pumps are not

self-priming. If suction line valves are

installed, the pump may be located

above water level. Keep the vertical dis-

tance from the water level to a mini-

mum. Otherwise, the pump must be

located below filled water level to facil-

itate priming.

Inground pool pumps are self-prim-

ing. Mount pump below water level for

easy priming. If the pump must be

located above the filled water level,

keep the vertical distance to a mini-

mum.

GENERAL PLUMBING

SOLVENT WELD CONNECTIONS

Use rigid or flexible PVC pipe. Ensure

pipe ends are clean and free of any

flash caused by the cutting operation.

Use the proper adhesive for the type of

pipe specified.

NOTE: Use an adhesive primer to

ensure adhesive joints are secure.

Suregard P-3000 has a purple tracer to

qualify in areas where codes specify a

primer must be used.

Description

This swimming pool pump is designed for

use with permanently installed pools only.

Unpacking

After unpacking the unit, carefully

inspect for any damage that may have

occurred during transit. Check for

loose, missing or damaged parts.

Danger indicates

an imminently haz-

ardous situation which, if not avoided,

will result in death or serious injury.

Warning indicates

a potentially haz-

ardous situation which, if not avoided,

could result in death or serious injury.

Caution indicates a

potentially haz-

ardous situation which, if not avoided,

may result in minor or moderate injury.

Notice indicates

important informa-

tion, that if not followed, may cause

damage to equipment.

This manual contains information that

is very important to know and under-

stand. This information is provided for

SAFETY and to PREVENT EQUIPMENT

PROBLEMS. To help recognize this

information, observe the following:

1. Read these rules and

instructions carefully.

Failure to follow these

instructions could

cause serious bodily

injury and/or property

damage.

NOTICE

CAUTION

WARNING

DANGER

READ &

FOLLOW ALL

INSTRUCTIONS

SAVE THESE

INSTRUCTIONS DO

NOT DISCARD

IMPORTANT

SAFETY

INSTRUCTIONS

MANUAL

PVC - PVC Joint PVC - ABS Joint

Uni-Weld Uni-Weld

Pool-Tite 2000 Pool-Tite 2000

Suregard Flex 20 Suregard Weld

All No. 5

IPS Weld-On 705 IPS Weld-On 794

*These recommendations are examples only

and are not intended to restrict brands

RECOMMENDED ADHESIVES*

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

For parts, product & service information

visit www.waynepumps.com