FRAME ASSEMBLY
ARM ASSEMBLY
8.Attach the Top Frame (55) to the Weight Guides (62) using a 5/16” x 6” Bolt (60), two 1/2” x 1/2” Spacers (61), and a 5/16” Nylon Locknut (3) as shown.
Tighten all Nylon Locknuts used in steps 3 through 8.
9.Lubricate a 3/8” x 4” Bolt (16). Attach the Press Frame (17) to the Base (4) using the Bolt and a 3/8” Nylon Locknut (21).Do not overtighten the Nylon Locknut; the Press Frame must be able to pivot freely.
10.Press a 1 3/4” Square Inner Cap (44) and a 1” Round Inner Cap (49) into the indicated end of each Press Arm (46).
Attach a Press Arm (46) to the Press Frame
(17)using two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylon Locknuts (3).
Attach the other Press Arm (46) in the same manner.
8 |
|
| 61 |
| 3 |
| 55 |
60 |
|
| 62 |
9 |
|
| 17 |
| 16 |
| Lubricate |
| 4 |
| 21 |
10 | 44 |
| |
| 49 |
| 46 |
| 3 |
| 22 |
46 | 17 |
10
