25
The divider between the two compartments is warm
The warmth is probably due to normal operation of the
automatic exterior moisture control. If still concerned, call for
service.
Temperature is too warm
■Are the air vents blocked in either compartment? This
prevents the movement of cold air from the freezer to the
refrigerator. Remove any objects from in front of the air vents.
See “Ensuring Proper Air Circulation” for the location of air
vents.
■Are the door(s) opened often? The refrigerator will warm
when this occurs. Keep the refrigerator cool by getting all
items out at one time, keeping food organized, and closing
the door as soon as possible.
■Has a large amount of food just been added to the
refrigerator or freezer? Adding a large amount of food
warms the refrigerator. It can take several hours for the
refrigerator to return to the normal temperature.
■Are the controls set correctly for the surrounding
conditions? See “Using the Controls.”
■Is the refrigerator not cooling? For models with digital
controls, turn the unit OFF then ON again to reset. See “Using
the Controls.” If this does not correct the problem, call for
service.
There is interior moisture buildup
■Are the air vents blocked in the refrigerator? Remove any
objects from in front of the air vents. See “Ensuring Proper Air
Circulation” for the location of air vents.
■Are the doors opened often? Avoid humidity buildup by
getting all items out at one time, keeping food organized, and
closing the door as soon as possible.
■Is the room humid? It is normal for moisture to build up
inside the refrigerator when the room air is humid.
■Is the food packaged correctly? Check that all food is
securely wrapped. Wipe off damp food containers before
placing in the refrigerator.
■Are the controls set correctly for the surrounding
conditions? See “Using the Controls.”
■Was a self-defrost cycle completed? It is normal for
droplets to form after the refrigerator self-defrosts.
The doors will not close completely
■Are food packages blocking the door open? Rearrange
containers so that they fit more tightly and take up less
space.
■Is the ice storage bin/bucket out of position? For models
with a standard ice storage bin, push the bin in all the way. If
the ice storage bin does not go in all the way, it may not be
put in straight. Pull it out and try again. For models with and
ice storage bucket located on the freezer door, the bucket
should sit level. To remove the bucket, press the release
button on the right side of the bucket and lift straight up.
Replace the bucket in the door making sure it is properly
aligned and snapped securely into place. See “Ice Maker and
Storage Bin/Bucket.”
■Are the pans, shelves, bins, or baskets out of position?
Put the crisper cover and all pans, shelves, bins, and baskets
back into their correct positions. See the “Convertible
Vegetable/Meat Drawer, Crisper and Covers” section for
more information.
■Are the gaskets sticking? Clean gaskets according to the
directions in the “Cleaning” section.
■Does the refrigerator wobble or seem unstable? Level the
refrigerator. See “Door Closing.”
■Were the doors removed during product installation and
not properly replaced? Remove and replace the doors
according to the instructions in the “Door Removal” section,
or call a qualified service technician.
The doors are difficult to open
■Are the gaskets dirty or sticky? Clean gaskets according to
the directions in the “Cleaning” section.
ASSISTANCE OR SERVICEBefore calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructio ns below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use FSP® replacement parts. FSP® replacement parts will fit
right and work right, because they are made with the same
precision used to build every new WHIRLPOOL® appliance.
To locate FSP® replacement parts in your area, call our Customer
Interaction Center telephone number or your nearest designated
service center.
In the U.S.A.
Call the Whirlpool Customer Interaction Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
■Features and specifications on our full line of appliances.
■Installation information.
■Use and maintenance procedures.
■Accessory and repair parts sales.
■Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.