WiLife DVS-110I Step 2 - Install the USB Receiver Module

Getting Started LukWerks User Guide

B. IF NECESSARY, WERKS WILL GUIDE YOU THROUGH THE INSTALLATION OF MICROSOFT .NET

The Microsoft .NET Framework is a collection of tools used by many software programs. Some

computers already have Microsoft's .NET Frame installed as part of other applications. For those that

do not yet have .NET installed, we will install it now. (Note that installing .NET will require a restart of

your computer.)

The first screen you will see in the Microsoft .NET

Framework Wizard is it’s license agreement screen, as

shown in this graphic.

Complete the License Agreement by clicking on the “I

agree” radio button, followed by the INSTALL button.

The system downloads .NET Framework in preparation to

moving on with the installation process. A status bar

displays, allowing you to view the progress of the .NET

Framework install. The install will take several minutes.

When the .NET Framework download is complete, you will

need to click the OK button to continue with the LukWerks

Install wizard.

Follow the on screen instructions of the Werks

installation wizard. Click the NEXT> button to advance

through the installation process.

One of the early steps is the LukWerks License

Agreement screen.

Please take a moment to review the license

agreement. If you accept the terms of the agreement,

click the “I accept the terms in the license agreement”

radio button and then click NEXT>. If you do not agree

with the terms of the agreement, click the “I do not

accept the terms in the license agreement” radio

button and the installation will be terminated.

Note: A copy of the license agreement can be found in two places: 1) In this user guide; and 2) on the

program CD. The filename is License.htm.

Step 2 - Install the USB Receiver Module

Now, with most of the software installed, you are ready to plug in the receiver and camera. The install

will prompt you to plug the receiver into the wall and connect it to a USB port on your PC.

1) Plug the USB Receiver Module directly into a wall

outlet near your PC.

Note: The USB Receiver Module has built in surge protection

and must be plugged directly into your wall outlet. It is highly

recommended that you do not plug the USB Receiver Module

into a surge protected power strip. Plugging the USB

Receiver Module into a surge protected power strip may

reduce the quality and performance of the LukWerks system.