Planning Information
Model MW24 Non-Convection Microwave Oven

Dimensions in parentheses are in

millimeters unless otherwise specified.

6

NON-CONVECTION MICROWAVE,

OVEN AND WARMING DRAWER

The Wolf non-convection microwave oven with30" (762) trim may be installed in combinationwith a 30" (762) built-in single oven and 30"(762) warming drawer with stainless steeldrawer front.Wolf recommends using 33" (838) cabinets withthis installation. Also, you need a minimum 24"(610) of usable cabinet depth for the oven. The base platform for the microwave must beable to support 125 lbs (57 kg). The platform forthe oven must be able to support a weight of250 lbs (113 kg). And the warming drawerplatform must be able to support 200 lbs (91 kg).An anti-tip block or platform must be installed toprevent the warming drawer from tippingforward when the drawer is opened. Thewarming drawer must be fully enclosed, top andbottom.For electrical requirements and additionalspecifications, refer to page 3, and to the Built-InOvens and Warming Drawers section of the Wolfwebsite at wolfappliance.com. Also refer to theinstallation instructions provided with eachmicrowave trim kit and warming drawer front fordetailed specifications.

Installation specifications for a non-convection microwave with 30" (762) trim installed above a 30" (762) built-in

single oven and 30" (762) warming drawer with stainless steel drawer front.

285/8" (727)
WARMING DRAWER
OPENING WIDTH
281/2" (724)
30-INCH OVEN
OPENING WIDTH
5"
(127)
4"
(102)
E
30"min (762) CABINET
23/8"
(60)
273/16"
(691)
24"min
(610)
273/16"
(691)
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
24"min
(610)
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
ANTI-TIP BLOCK APPLICATIONPLATFORM APPLICATION
7/8" (22)
PLATFORM
7/8"
(22)
E
271/2" (699)
NON-CONVECTION
MICROWAVE
OPENING WIDTH
17"
(432)
20"min
(508)
1"min
(25)
17"
(432)
20"min
(508)
1"min
(25)