17
Heat Output
Dimensions
h x w x d Flue Diameter
(inner) Center Height
rear design Weight Area Heated
Model
(kW) (mm) (mm) (mm) (kg) (m3 )
VESUV 8 1478 x 828x 636 150 1250 285 180
ETNA 8 1478 x 992x 636 150 1250 260 180
ELBRUS 8 1478 x 702x 619 150 1250 290 180
MERU 8 1024 x 598 x 473 150 858 160 (ceramic)
190 (stone) 180
Chimney Data
Draft
Average Flue Gas Flue Gas Heat
Average Wood Use – Single Load
3-4 pieces of wood, 15-20% moisture
(Pa) (cm2) (g/s) (oC) (kg/h)
10 225 7,41 350 2.6
Note: We reserve the right to make modifications in the interest of technical advances!
Room Heating Capacity
The room heating capacity has a nominal value of 8 kW and is to be calculated as follows, according to DIN 18 893, for
rooms that do not have insulation that complies with the Heat Insulation Ordinance:
For favorable heating conditions – calculated according to DIN 4701
At less favorable heating conditions - 145 m³
At unfavorable heating conditions - 98 m³
For interval heating, with interruptions of more than 8 hours, the heating capacity is reduced by 25%.
3.3 Delivery Damage can occur to the product during transport, even though the packaging appears to be undamaged upon visual inspec-
tion. Therefore, it is important that you inspect the stove itself very carefully and report all damages within one week. In
the event of obvious visual damage to the product or its packaging, make a note of this on the shipping papers before ac-
cepting the merchandise.
All cardboard and synthetic materials are recyclable. Please dispose of these at your local
recycling center. None of the wooden parts have been surface treated, and they can be used
as heating materials for your woodstove. Very carefully open the packaging so that you do
not damage anything. Prior to installation, make sure that the base construction can support
the weight of the stove! Use only proper lifting aids with adequate support capacities to
move your woodstove.
Please do not stand on top of your woodstove; it is not designed to be used as a ladder or
scaffolding.