
DATA: YOUR BATTERY HISTORY
DATA: The DATA mode is used to recall key historical information about the battery.
To access the DATA displays:
Before you begin, select the battery whose data you wish to see.
1)Hold down the SET button until SEL appears in the numeric display.
2)Press the SEL button six times until the red light above the word DATA appears.
3)Charging Efficiency Factor is the first number displayed.
4)Press SEL again. The number of CEF Recalculations is displayed.
5)Press SEL again. The deepest depth of discharge is displayed.
6)Press SEL again. The average depth of discharge is displayed.
7)Press SEL again. The next light on the Light Bar, the one over the word LOCK will come on. The LOCK function is described on the next page.
What the Historical Information Means:
CEF (Displayed as E99): The Charging Efficiency Factor (CEF) is the rate at which amp hours are counted back up during charging. The
#CEF Recalculations (Displayed as +I999): This is the number of times that the battery has been discharged more than 10% and then completely recharged (meaning charged until theChargedParametershavebeenmet).Considerthistobe thenumberofcharge/discharge cycles the meter has recorded since its last RESET to factory defaults. A discharge of less than 10% of battery capacity is not counted as a "cycle."
Deepest Discharge (Displayed as
Average Discharge (Displayed as i999): The running average of all discharges since RESET to factory defaults. For best battery life, you should not routinely discharge more than