Yamaha 300 owner manual

Features

■

Two-way, 8-inch (20 cm) speaker system

The built-in speakers deliver high-quality powerful sound from an exceptionally compact cabinet. The scratch-

resistant speakers are rugged enough for outdoor use.

■

Powered mixer

The powered mixer is a convenient, high-performance all-in-one unit that includes EQ and reverb. With four mono

inputs and two stereo inputs, the STAGEPAS 300 can be connected to a wide range of instruments and devices.

■

Convenient storage

The STAGEPAS 300 can be used in even the most cramped quarters, inside or outside, since the mixer is

built into one of the speaker cabinets. The other speaker has a special compartment for storing speaker

cables and microphones, letting you put all you need for your performance in one convenient place.

Package Contents

Two speakers, mixer, panel, power cord, two speaker cables, Owner's Manual (this booklet)

NOTE: The mixer and the panel are installed in the speakers when the STAGEPAS 300 leaves the factory.

Make sure that the mixer's power switch is turned off.

Connect the included power cord to the [AC IN] jack.

Plug the power cord into a power outlet.

•

To avoid any loud, unexpected noise from the speakers, first turn on the power to those connected

devices that are closest to the sound source.

Example: Sound source (CD player or instrument) → STAGEPAS 300

When turning off the power to the system, reverse the order described above.

• Before turning on the power, set the LEVEL controls and MASTER LEVEL control to their minimum

setting (zero).

• Before connecting any devices including the supplied speakers, make sure to turn off the power for

all devices. To avoid any possible malfunction, use only the speaker cables included with the device.

Press the mixer's power switch to the ON position (the POWER indicator lights).

To turn the power off, press the power switch to the OFF position (the POWER indicator turns off).

Dimensions

290

MSC

Mixer

Unit: mm

Speaker

55.

-M8x25

120

1. Be sure that the mixer's power switch is turned off.

Use a screwdriver or coin to turn each screw on the mixer from LOCK to OPEN until it clicks.

Securely hold the mixer's handles to remove it from the speaker.

Use only the mixer's handles when removing the mixer from the speaker and when carrying the

mixer separate from the speaker.

NOTE:

The mixer can also be used when installed in the speaker.

When you install the mixer into the speaker, make sure to match the indentations on the speaker cabinet to

the corresponding parts on the mixer, and then turn each screw from OPEN to LOCK until it clicks.

Before turning on the mixerBefore turning on the mixerBefore turning on the mixer

Remove the mixerRemove the mixerRemove the mixer

Power supply connections

Power supply connectionsPower supply connections

Turning the power on/

Turning the power on/ offoffTurning the power on/ off

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The above warning is located on the bottom

of the mixer and the rear of the speakers.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to

the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

Explanation of Graphical Symbols

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from

tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

(98-6500)

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Only use the voltage specified as correct for the device. The required voltage is

printed on the name plate of the device.

• Use only the included power cord.

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on

it, or place it in a position where anyone could walk on, trip over, or roll anything

over it.

Do not open

• Do not open the device or attempt to disassemble the internal parts or modify

them in any way. The device contains no user-serviceable parts. If it should

appear to be malfunctioning, discontinue use immediately and have it inspected

by qualified Yamaha service personnel.

Water warning

• Do not expose the device to rain, use it near water or in damp or wet conditions,

or place containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

If you notice any abnormality

• If the power cord or plug becomes frayed or damaged, or if there is a sudden

loss of sound during use of the device, or if any unusual smells or smoke should

appear to be caused by it, immediately turn off the power switch, disconnect the

electric plug from the outlet, and have the device inspected by qualified Yamaha

service personnel.

• If this device should be dropped or damaged, immediately turn off the power

switch, disconnect the electric plug from the outlet, and have the device

inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or

other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Remove the electric plug from the outlet when the device is not to be used for

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

Location

• Before moving the device, remove all connected cables.

•

Do not use the device in a confined, poorly-ventilated location. Make sure that

there is adequate space between the mixer and surrounding walls or other

devices: at least 30 cm at the sides, 30 cm behind and 30 cm above. If the mixer

is to be used installed into the speaker cabinet, make sure to allow adequate

space between the speaker and the surrounding walls or other devices: at least

30 cm at the sides, 30 cm behind and 30 cm above. Inadequate ventilation can

result in overheating, possibly causing damage to the device(s), or even fire.

•

Do not use the speaker's handles for suspended installation. Doing so can result

in damage or injury.

•

Avoid setting all equalizer controls and LEVEL controls to their maximum.

Depending on the condition of the connected devices, doing so may cause

feedback and may damage the speakers.

•

Do not expose the device to excessive dust or vibrations, or extreme cold or heat

(such as in direct sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disfiguration or damage to the internal components.

•

Do not place the device in an unstable position where it might accidentally fall over.

•

Do not block the vents. This mixer has ventilation holes at the top to prevent the

internal temperature from becoming too high. In particular, do not place the

device on its side or upside down. Inadequate ventilation can result in

overheating, possibly causing damage to the device(s), or even fire.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Doing so may result in noise, both in the device

itself and in the TV or radio next to it.

Connections

• Before connecting the device to the included speakers or other devices, turn off

the power for all devices. Before turning the power on or off for all devices, set all

volume levels to minimum.

•

For the SPEAKERS jacks, Use only the included speakers and speaker cables. Use of

other types of speakers and cables may result in damage to the device(s), or even fire.

Handling caution

• When turning on the AC power in your audio system, always turn on the device

LAST, to avoid speaker damage. When turning the power off, the device should

be turned off FIRST for the same reason.

•

Do not insert your fingers or hands in any gaps or openings on the device

(vents,, ports, etc.).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any

gaps or openings on the device (vents, ports, etc.) If this happens, turn off the

power immediately and unplug the power cord from the AC outlet. Then have

the device inspected by qualified Yamaha service personnel.

•

Do not use the device for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you experience

any hearing loss or ringing in the ears, consult a physician.

•

Do not operate the device if the sound is distorting. Prolonged use in this

condition could cause overheating and result in fire.

• Do not rest your weight on the device or place heavy objects on it, and avoid

use excessive force on the buttons, switches or connectors.

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground,

pin 2: hot (+), and pin 3: cold (-).

Interference From Cell Phones

Using a cell phone near the speaker system can induce noise. If this occurs,

move the cell phone further away from the speaker system.

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the device.

Always turn the power off when the device is not in use.

The performance of components with moving contacts, such as switches, volume

controls, and connectors, deteriorates over time. Consult qualified Yamaha service

personnel about replacing defective components.

Illustrations in this manual are for explanatory purposes only,

and may not match the actual appearance of the product during operation.

Company names and product names used in this Owner's Manual are trademarks

or registered trademarks of their respective owners.

(5)-3

Caution

Power does not turn on

Is the included power cord correctly connected to a power outlet?

Power shuts down suddenly

Is the volume set at high for an extended period of time?

If the mixer is used at a volume beyond the permissible level, the protection circuit automatically turns the power off.

Turn on the power again only after the mixer cools, since it cannot be turned on until the internal temperature goes down.

Reduce the volume with the MASTER LEVEL control so that the LIMITER indicator flashes only briefly in response to the

highest transient peaks.

Is the vent on the top panel of the mixer blocked?

Since inadequate ventilation can result in overheating the mixer, the protection circuit may come on

automatically and the power may be turned off.

Turn on the power again only after the mixer cools, since it cannot be turned on until the internal

temperature goes down.

No sound is heard

Are external instruments (including a microphone) or speakers correctly connected to the mixer?

Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

Are the SPEAKER L/R jacks connected to the included speakers?

Is the POWER indicator flashing?

There may be a short in the speaker cable or the connection may be faulty. Check that the speaker

cable is correctly connected to the mixer and reapply the power.

If sound is not still output, contact your Yamaha dealer.

Sound is interrupted

Is the volume set too high?

If the mixer is used at a volume beyond the permissible level, the sound may be interrupted as the

protection circuit automatically turns the power off and resets repeatedly.

Reduce the volume with the MASTER LEVEL control so that the LIMITER indicator flashes only briefly

on the highest transient peaks.

Sound is distorted or noise is produced

Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

Are the MIC/LINE switches of each channels set appropriately?

Are both XLR type and phone type jacks on channels 1–4 being used (connected) at the same time?

Please connect to only one of these jacks on each channel.

Is the input signal from the connected device set to an appropriate level?

Sound is not loud enough

Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

Are the MIC/LINE switches of each channels set appropriately?

Are both XLR type and phone type jacks on channels 1–4 being used (connected) at the same time?

Please connect to only one of these jacks on each channel.

Is the input signal from the connected device set to an appropriate level?

Reverb is not applied to the sound

Are the REVERB switches of each channels set to ON ( )?

Is the REVERB control set to an appropriate level?

Getting a more powerful sound from the speakers

Is the SPEECH/MUSIC switch set to MUSIC ( )?

Are the Equalizer controls (HIGH/LOW) set to appropriate levels?

Getting a clearer sound for announcements

Is the SPEECH/MUSIC switch set to SPEECH ( )?

Are the Equalizer controls (HIGH/LOW) set to appropriate levels?

Using a single speaker

You can use a single speaker. If you use a single speaker, the mixer outputs just one channel of the

stereo signal, left or right.

Outputting the signal for monitoring

Connect a powered speaker to the MONITOR OUT jack. The MONITOR OUT jack outputs the signal

prior to routing through the MASTER LEVEL control. Adjust the level of output signal from the

MONITOR OUT jack with the MONITOR OUT control. The MONITOR OUT control does not affect the

MASTER LEVEL control. If the signals are output from the L (left) MONITOR OUT jack, the mixer feeds

the mixed L and R signals to the jack.

■General Specifications

Maximum Output Power

150 W+150 W/6 Ω @10 % THD at 1 kHz (SPEAKER L/R)

100 W+100 W/6 Ω @1 % THD at 1 kHz (SPEAKER L/R)

Frequency Response

-3 dB, 0 dB, +1 dB @20 Hz–20 kHz, 1 W Output/6 Ω (Without

MUSIC/SPEECH, EQ and SP EQ Circuit) (SPEAKER L/R)

-3 dB, 0 dB, +1 dB @20 Hz–20 kHz, +4 dBu 10 kΩ Load

[MUSIC/SPEECH]switch=MUSIC (MONITOR OUT, REC OUT)

Total Harmonic Distortion

1 % @1 kHz, 50 W Output Power (SPEAKER L/R)

0.5 % @20 Hz–20 kHz, +14 dBu 10 kΩ (MONITOR OUT, REC OUT)

Hum & Noise (20 Hz–20 kHz, Rs=150 Ω, MIC/LINE switch=MIC)

-65 dBu Residual output noise (SPEAKER L/R)

-90 dBu Residual output noise (MONITOR OUT, REC OUT)

-67 dBu @MONITOR OUT control & one CH LEVEL control at nominal

level (CH1–4)(MONITOR OUT)

Crosstalk (1 kHz)

-70 dB between input channels

Weight

18 kg (mixer and two speakers)

Power Consumption

70 W

Stereo Input Channel Equalization:

Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost.

±15 dB

HIGH 10 kHz shelving

LOW 100 Hz shelving

■Speaker

Enclosure

Bass-reflex type

Speaker Unit

LF: 8" (20 cm) Cone

HF: 1" (2.54 cm) Compression Driver

Cross Over Frequency

4 kHz

Frequency Range

55 Hz–20 kHz

Maximum Output Level

112 dB (1 m)

Introduction

Thank you and congratulations on your

purchase of the Yamaha PORTABLE PA

SYSTEM STAGEPAS 300. The STAGEPAS

300 is a versatile, compact PA system

consisting of two speakers and a mixer. In

order to get the most out of your new

STAGEPAS 300 and its sophisticated

functions, we suggest you read through

this manual thoroughly. Also keep it

in a safe place for future

reference.

TroubleshootingTroubleshootingTroubleshooting

Specifications

Specifications and descriptions in this owner's manual are for information

purposes only. Yamaha Corp. reserves the right to change or modify

products or specifications at any time without prior notice. Since

specifications, equipment or options may not be the same in every locale,

please check with your Yamaha dealer.

European models

Purchaser/User Information specified in EN55103-1 and EN55103-2.

Inrush Current: 46A

Conforms to Environments: E1, E2, E3 and E4

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets

FCC requirements. Modifications not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC authorization to use this product

in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides

a reasonable level of assurance that your use of this product in a residential environment will not

result in harmful interference with other electronic devices. This equipment generates/uses

radio frequencies and, if not installed and used according to the instructions found in the users

manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all

installations. If this product is found to be the source of interference, which can be determined by

turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you can not locate the appropriate retailer, please

contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave,

Buena Park, CA90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America

or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (3 wires)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is

marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or

coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or

coloured RED.

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

Block Diagram

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

904MW-D0 Printed in China

Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/

Yamaha Manual Library: http://www.yamaha.co.jp/manual/

PA24

NORTH AMERICA

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Scarborough, Ontario,

M1S 3R1, Canada

Tel: 416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Ave., Buena Park, Calif. 90620,

U.S.A.

Tel: 714-522-9011

CENTRAL & SOUTH AMERICA

MEXICO

Yamaha de México S.A. de C.V.

Calz. Javier Rojo Gómez #1149,

Col. Guadalupe del Moral

C.P. 09300, México, D.F., México

Tel: 55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,

CEP 04534-013 Sao Paulo, SP. BRAZIL

Tel: 011-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.

Sucursal de Argentina

Olga Cossettini 1553, Piso 4 Norte

Madero Este-C1107CEK

Buenos Aires, Argentina

Tel: 011-4119-7000

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Torre Banco General, Piso 7, Urbanización Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, Panamá

Tel: +507-269-5311

EUROPE

THE UNITED KINGDOM

Yamaha Music U.K. Ltd.

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, England

Tel: 01908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen,Germany

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH

Branch Switzerland in Zürich

Seefeldstrasse 94, 8008 Zürich, Switzerland

Tel: 01-383 3990

AUSTRIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

CZECH REPUBLIC/SLOVAKIA/

HUNGARY/SLOVENIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-602039025

POLAND

Yamaha Music Europe GmbH

Branch Sp.z o.o. Oddzial w Polsce

ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland

Tel: 022-868-07-57

THE NETHERLANDS/

BELGIUM/LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, The Netherlands

Tel: 0347-358 040

FRANCE

Yamaha Musique France

BP 70-77312 Marne-la-Vallée Cedex 2, France

Tel: 01-64-61-4000

ITALY

Yamaha Musica Italia S.P.A.

Combo Division

Viale Italia 88, 20020 Lainate (Milano), Italy

Tel: 02-935-771

SPAIN/PORTUGAL

Yamaha Música Ibérica, S.A.

Ctra. de la Coruna km. 17, 200, 28230

Las Rozas (Madrid), Spain

Tel: 91-639-8888

SWEDEN

Yamaha Scandinavia AB

J. A. Wettergrens Gata 1, Box 30053

S-400 43 Göteborg, Sweden

Tel: 031 89 34 00

DENMARK

YS Copenhagen Liaison Office

Generatorvej 6A, DK-2730 Herlev, Denmark

Tel: 44 92 49 00

NORWAY

Norsk filial av Yamaha Scandinavia AB

Grini Næringspark 1, N-1345 Østerås, Norway

Tel: 67 16 77 70

RUSSIA

Yamaha Music (Russia)

Office 4015, entrance 2, 21/5 Kuznetskii

Most street, Moscow, 107996, Russia

Tel: 495 626 0660

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

AFRICA

Yamaha Corporation,

Asia-Pacific Music Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

MIDDLE EAST

TURKEY/CYPRUS

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

OTHER COUNTRIES

Yamaha Music Gulf FZE

LOB 16-513, P.O.Box 17328, Jubel Ali,

Dubai, United Arab Emirates

Tel: +971-4-881-5868

ASIA

THE PEOPLE'S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: 021-6247-2211

INDIA

Yamaha Music India Pvt. Ltd.

5F Ambience Corporate Tower Ambience Mall Complex

Ambience Island, NH-8, Gurgaon-122001, Haryana, India

Tel: 0124-466-5551

INDONESIA

PT. Yamaha Music Indonesia (Distributor) PT. Nusantik

Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto

Kav. 4, Jakarta 12930, Indonesia

Tel: 21-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,

Kangnam-Gu, Seoul, Korea

Tel: 080-004-0022

MALAYSIA

Yamaha Music Malaysia, Sdn., Bhd.

Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,

Petaling Jaya, Selangor, Malaysia

Tel: 3-78030900

SINGAPORE

Yamaha Music Asia Pte., Ltd.

#03-11 A-Z Building 140 Paya Lebor Road, Singapore

409015

Tel: 747-4374

TAI WAN

Yamaha KHS Music Co., Ltd.

3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C.

Tel: 02-2511-8688

THAILAND

Siam Music Yamaha Co., Ltd.

4, 6, 15 and 16th floor, Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: 02-215-2626

OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacific Music Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2317

OCEANIA

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 99 Queensbridge Street, Southbank,

Victoria 3006, Australia

Tel: 3-9693-5111

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

Yamaha Corporation, Asia-Pacific Music Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

HEAD OFFICE

Yamaha Corporation, Pro Audio & Digital Musical

Instrument Division

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2441

Owner’s Manual

LOCK

OPEN

INPUT

(CH1–4)

INPUT

(CH5/6)

LOW HIGH

LOW

HIGH

LEVEL

REVERB

SUM

L/L+R

LIMITER

[-8dBu]

MONITOR

OUT

LIMITER

SP EQ

REVERB

MONITOR OUT

[-8dBu]

INPUT

(CH7/8)

LOW HIGH

LEVEL

HPF

DIGITAL

EFFECT BA

MUSIC

LIMITER

MASTER LEVEL

SPEECH

MUSIC

REC OUT

SPEAKER OUT

MIC/ LINE

SPEECH

MUSIC

SPEECH/ MUSIC

-1

SP EQ

[+4dBu]

[-8dBu] [+23dBu][+10dBu]

[-10dBu]

PAD:30dB

[-60–+20dBu]

[-50–+30dBu]

[-20–+20dBu]

EFFECT