Yamaha 9000 Pro

Starting Up

Use the following procedure to start up the 9000Pro.

1Make sure that the POWER switch is in the OFF position.

2Securely plug the “female” end of the

AC power cord supplied with the

9000Pro into the rear-panel AC cord

socket.

3Plug the power cord into a convenient

AC outlet.

To disconnect the AC power cord, set the POWER switch to OFF, then

unplug the AC power cord from the AC outlet, and disconnect it from the

9000Pro AC INLET.

4Make all necessary connections (pages 12 and 13), making

sure ﬁrst that all level controls on those devices are set to

the minimum. (Refer to the owner’s manuals of the devices

you are using for more information on connections.)

Since the 9000Pro has no built-in speakers, you need to monitor its sound

output via external audio equipment. Alternatively, you could use a pair of

headphones.

5Turn the power ON. If you’ve connected any external

devices to the 9000Pro, turn on the power of those devices

in the following order:

When turning off the power, make sure that all level controls on those devices

above are set to the minimum and simply reverse the above order.

6Turn up the volume of the external audio equipment, as nec-

essary.

7After the main display appears, play and adjust the volume.

WARNING

• Make sure your 9000Pro is rated

for the AC voltage supplied in

the area in which it is to be used

(as listed on the rear panel).

Connecting the unit to the

wrong AC supply can cause

serious damage to the internal

circuitry and may even pose a

shock hazard!

• Use only the AC power cord

supplied with the 9000Pro. If the

supplied cord is lost or dam-

aged and needs to be replaced,

contact your Yamaha dealer. The

use of an inappropriate replace-

ment can pose a ﬁre and shock

hazard!

• The type of AC power cord pro-

vided with the 9000Pro may be

different depending on the

country in which it is purchased

(a third prong may be provided

for grounding purposes).

Improper connection of the

grounding conductor can create

the risk of electrical shock. Do

NOT modify the plug provided

with the 9000Pro. If the plug will

not ﬁt the outlet, have a proper

outlet installed by a qualiﬁed

electrician. Do not use a plug

adapter which defeats the

grounding conductor.

Press the [POWER] switch. After a

while, the main diaplay below appears.

z MIDI controller x 9000Pro c Audio equipment