Yamaha 9000 Pro

Using the Optional Plug-in Board

Installing an optional Plug-in Board to the 9000Pro lets you greatly expand the sonic palette of the instru-

ment. Once you've installed an optional Plug-in Board to the 9000Pro, you have instant access to a whole

new set of amazing, dynamic voices, in addition to the built-in voices of the 9000Pro.

Playing a Plug-in Voice

1Install the Optional Plug-in Board to the 9000Pro.

See page 180 for installation instructions.

In this example, a PLG150-VL Virtual Acoustic Plug-in Board has

been installed to SLOT 1. The PLG150-VL lets you expand the sonic

palette of your 9000Pro by adding 256 dynamic VL voices (including

137 VL-XG voices), created with the unique Virtual Acoustic Synthe-

sis system.

2After you've installed the Plug-in Boards, turn the power ON.

When turning the power ON for the ﬁrst time after installing the board, a mes-

sage appears indicating that the board settings are being initialized, followed

after a while by the main display.

Note that it takes a short amount of time before the main display appears, espe-

cially if two boards have been installed. If an error message appears, check that

the board or boards have been properly installed to the 9000Pro.

3After the main display appears, insert the "Plug-in Custom

Voice" disk supplied with the 9000Pro and load the ﬁle

"150VL CsVce.xvc" to the 9000Pro via the Plug-in Manager

function. See page 66 for details.

4Press the [R1] LCD button to turn the RIGHT1 part on.

Plug-in Voice related

buttons

Up to two boards can be

installed to the bottom

panel.

Reference

on page 64

PLG150-VL

RIGHT3RIGHT2

UPPER

LEFTLEFT HOLD

LOWER

RIGHT1

PART ON

OFF

PART SELECT