ACD1 Reference Manual 9
Panel operations
5. Use the [▲INC/YES] / [▼DEC/NO] buttons to select the ID of
the amplifier for which you want to store settings.
6. Press the [NEXT] button to move to the scene number.
7. Use the [▲INC/YES] / [▼DEC/NO] buttons to select the scene
number that you want to store.
8. Press the [NEXT] button to move to .
9. Press the [▲INC/YES] button to move to the screen where you
can specify the scene name.
10.
Use the [▲INC/YES] / [▼DEC/NO] buttons to edit the first
character of the scene name.
11.
Press the [NEXT] button to move to the next character of the
scene name.
12.
Repeat steps 10 and 11 to edit the scene name.
13.
Press the [NEXT] button to move to .
• indication is not shown for display-only parameters, or for
parameters that reflect changes in realtime.
14.
Press the [▲INC/YES] button to move to the confirmation
screen.
15.
Press the [▲INC/YES] button to execute the Store operation.
Do not turn off the power while the “Do not turn off!” indication is
shown.
If you press the [▼DEC/NO] button, you will return to step 13 without
storing.
• If the display indicates “Parameter Locked!”, Panel Operation is set to “View Only.” To temporarily defeat the panel lock,
hold down both the [▲INC/YES] / [▼DEC/NO] buttons for at least three seconds. To disable the panel lock, first defeat it
temporarily, and then turn the Panel Operation setting Normal (page 14).
•If the screen indicates “Scene Store: XX Overwrite?”, scene data has already been stored in the selected scene. If you
want to overwrite the existing data, press the [▲INC/YES] button. If you want to store the settings to a different scene
number without overwriting, return to step 7, and re-select the scene number for storing.
å
Amp ID: 02
00 Initial Data
å
Amp ID: 02
00 Initial Data
å
Amp ID: 02
03:NO SCENE
å
Amp ID: 02
03:NO SCENE
å
03:Initial Data
å
03:1nitial Data
å
03:1nitial Data
å
03:1stStage 01
å
03:1stStage 01
NOTE
03:1stStage 01
Are You Sure?
File writing
Do not turn off!
NOTE