Adjusting the Level

CDC-906 only■Adjusting the level of signals outputinto an amplifier, etc.

You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL –/+buttons.

—

OUTPUT LEVEL

—

OUTPUT LEVEL

 

or

On the front panel

For optimum sound quality

*When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max.

*The level of output signals can be checked in the display.

6 7 8 9 10

11 12 13 14 15

16 17 18 19 20

VARIOUS FUNCTIONS

Timer Play

CDC-906 only

You can start play at any specified time by connecting a timer (sold separately). Refer also to the instructions for the timer.

1Select the desired play mode (1DISC or 5DISCS).2 Press the POWER switch to turn the unit off.3Press the POWER switch while pressing the w/d button on the front panel.

Shortly thereafter, “TIMER P. ON” appears in the display and the timer play function is on.

(When the timer play function is already on, in which case, “TIMER P. OFF” appears in the display and timer play function is off. In this case, repeat the procedure in steps 2 and 3 to set the timer play function to on.)

4Set the timer to the desired time.When the set time comes, the unit turns on and starts play.

NATURAL SOUND COMPACT DISC PLAYER

POWER

DISC

PLAYXCHANGE

PROG

1

2

3

4

5

 

 

 

 

PHONES

 

 

 

 

1

2

3

4

5

+10

6

7

8

9

0

 

OUTPUT LEVEL

 

 

 

 

 

 

 

PEAK

 

 

 

 

CDS PLAYING

2,3

3

CDC-906 only

■When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL –/+buttons.

*Note that the use of the OUTPUT LEVEL –/+buttons will also vary the level of the signal output to an amplifier, etc.

PHONES

English

E-15