PRECAUTIONS: READ THIS BEFORE OPERATING THIS UNIT ............
•To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
•Install this unit in a well ventilated, cool, dry, clean place with at least 5 cm of ventilation space on the top, right and left, and at the back of this unit – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
•Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. To prevent fire or electrical shock, do not place this unit where it may get exposed to rain, water, and/or any type of liquid.
•Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.
•On the top of this unit, do NOT place:
•Other components, as they may cause damage and/or discoloration on the surface of this unit.
•Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
•Containers with liquid in them, as they may cause electrical shock to the user and/or damage to this unit.
•Do not cover the rear panel of this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.
•Do not plug in this unit to a wall outlet until all connections are complete.
•Do not operate this unit
•Do not use force on switches, knobs and/or cords.
•When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.
•Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
•Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
•To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.
•Take care of this unit so that no foreign objects and/or liquid drops inside this unit.
•Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.
•When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.
•Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.
•Before moving this unit, first check that there is no disc in the disc tray. To prevent damage to this unit, be sure to
insert the transportation pad in the disc tray. Finally, press POWER to turn off this unit, and disconnect the AC power plug from the wall outlet. After this unit is moved, remove the pad to ensure correct operation.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described above.
Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.
Voltage Selector (General model only)
The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC power supply.
Voltages are 110/120/220/240 V AC, 50/60 Hz.