Yamaha CLP-157 MIDI Functions

MIDI Functions

▼

Left-hand section plays

a DOU-10 bass voice. Right-hand section plays a

Clavinova piano voice.

SPLIT POINT

ZPress the [E.PIANO 1] voice selector while holding down the [MIDI/

TRANSPOSE] button. The E.PIANO 1 LED will flash.

XWhile still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The E.PIANO 1

LED will light continuously. The split-point becomes the first key of

the left-hand section.

CRelease the [MIDI/TRANSPOSE] button.

VTo return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [E.PIANO 1] voice selector, then release

both buttons.

NOTE

•When the power is turned ON the default split point key — F

2 — will be

automatically selected. If a new split point is selected it remains active

until the power is turned OFF or a different split point is selected.

●The MIDI Split & Right Local Off Mode

In the CLP-157 either the right- or left-hand section of the keyboard can be assigned to control an external

keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in

the previous section. To assign the right-hand section to external tone generator control while playing the

Clavinova voices with the left hand, press the [E.PIANO 2] voice selector instead of the [E.PIANO 1] voice

selector when activating the Split mode (see the preceding section). All other operations are exactly the same as

described in the previous section.

●Transmitting the Panel Settings

This function causes all the current Clavinova control settings (selected voice, etc) to be transmitted via the

MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-

corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings

and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be

automatically restored to the same settings when the performance is played back.

ZHold down the [MIDI/TRANSPOSE] button.

XPress the [HARPSICHORD] voice selector.

CRelease the [MIDI/TRANSPOSE] button.

MIDI/

TRANSPOSE

INOVA

NE E. PIANO 1 E. PIANO 2

MIDI/

TRANSPOSE

NO 2 HARPSI-

CHORD VIBES

NOTE

•See page viii for list of the panel settings transmitted by this function.

●Bulk Data Dump This function is used to transmit all data stored in the Recorder memory

to a MIDI data storage device such as the Yamaha DOU-10 Disk Orchestra

Unit, other sequence recorders, or MIDI compatible computers.

ZHold [MIDI/TRANSPOSE] and press the [PLAY] button. Transmis-

sion will begin.

XRelease the buttons.

NOTE

•Bulk dump will not function when the metronome is on or when the re-

corder is in operation.

MIDI/

TRANSPOSE

RECORDER

PLAY REC