8
qA/B/C/D/E, PRESET +/–
These buttons are used to select a preset station when using
the YAMAHA tuner.
A/B/C/D/E: To select one of a group (A to E) of preset
stations
PRESET +/–: To select a preset station number (1 to 8)
wd (next), u (back)
These buttons are used to advance or go back one selection
on the SET MENU and TIME/LEVEL mode.
eSET MENU
Press this button to select the items on the SET MENU.
rPOWER
Press this button to turn this unit on.
tSTANDBY
Press this button to set this unit in the standby mode.
yVOLUME (+/–)
These buttons are used to adjust the volume level.
uMUTE
Press this button to mute the sound. To cancel mute, press
this button again.
EFFECT
Press this button to turn on or off the effect speakers (center
and rear) in the following cases:
When the selector dial is set to the DSP/TUN position.
While the indicator is lit for about three seconds after
pressing DSP.
Description of the Numeric Buttons
The Numeric buttons function in various ways depending
on the position of the selector dial or the combination of
other instructions.
When selecting an input source
1Press INPUT regardless of the position of the
selector dial.
The indicator lights up for about three seconds.
2You can select an input source with the
numeric buttons while the indicator is lit.
CONTROLS AND FUNCTIONS
When selecting a DSP program
and turning on or off the effect
speakers (center and rear)
A
1Press DSP regardless of the position of the
selector dial.
The indicator lights up for about three seconds.
2You can select a DSP program with the
numeric buttons (1 to 8) and turn on or off the
effect speakers (center and rear) by pressing
EFFECT while the indicator is lit.
B
1Set the selector dial to the DSP/TUN position.
2You can select a DSP program directly with the
numeric buttons (1 to 8) and turn on or off the
effect speakers (center and rear) by pressing
EFFECT.
AB
0102DSP-A501-08_EN 2/29/0, 4:53 PM8