12

710-037a

3.Remove the air filter cover 1 and foam element

2.

4.Wash the foam element in solvent and dry it.

5.Oil the foam element and squeeze out excess oil. The foam element should be wet but not dripping.

Recommended oil: Foam-air-filter oil

or

SAE #20 motor oil

cC

Do not wring out the foam element when squeezing it.

This could cause it to tear.

6. Insert the foam element into the air filter case.

NOTE:

Be sure the foam element sealing surface matches the air filter so there is no air leak.

cC

The engine should never run without the foam ele- ment; excessive piston and cylinder wear may result.

7.Install the air filter cover in its original position and tighten the bolts.

8.Install the front cover and tighten the bolts.

– 30 –