AE00889
Engine
Perform the following steps to protect the cylinder, piston ring, etc. from corrosion.
1. Remove the spark plug cap and spark plug, pour about one tablespoon of SAE 10W30 or 20W40 motor oil into spark plug hole and reinstall the spark plug only.
2. Turn the engine switch to “START” and crank the engine several seconds with ignition off to coat the cylinder walls with oil.
3. Clean exterior of the generator and apply a rust inhibitor.
4. Store the generator in a dry,
5. The generator must remain in a vertical position when stored, carried or operated. The caster lock lever should be in the “Lock” when stored or oper- ated.
– 39 –