Yamaha EX5, EX5R, EX7

138

Voice Mode

■Wet Gain

Sets the maximum output level for the modulated

signal.

❏ Settings: 0~127

■Wet Vel (Wet Level Velocity)

Sets the velocity sensitivity for the Wet Level. This

lets you control the output level of the modulated

signal by the strength at which you play the

keyboard.

❏ Settings: –64~0~+63

■Wet Level

Sets the output level for the signal that is affected by

the Tornado. You can adjust the FDSP (Tornado)

balance by combining this parameter and the Dry

Level below.

❏ Settings: 0~127

■Dry Level

Sets the output level for the original input signal.

❏ Settings: 0~127

■Pan

The same as the one in the EP Pickup. See page 126

for information.

09: Ring Mod (Ring Modulator)

Ring Mod modulates the original input signal (as

carrier) using the modulators of the amplitude

modulation (AM). When set to a maximum (200%) of

modulation depth, being equivalent to a conventional

“ring modulator,” two frequency components are

generated: the one as a sum frequency of the carrier

and modulator signals, and the other as a difference of

them. As the modulation depth is decreased, the

intensity of the carrier frequency components is more

dominant in output. When set to 0%, only the original

input signal is output. Even though this program uses a

sine wave as the modulation wave, the Ring Mod

provides with more complicated harmonics because

two AM modulators (main and sub) can be used.

The underlined items in the diagram are available as the

Destination parameters for the FDSP Controller set (page

141).

■Pitch Coarse

Sets the pitch of the main modulator’s wave in

semitones. A setting of “0” produces a pitch of C3 =

261.63Hz.

❏ Settings: –64~0 (C3)~+63

■Pitch Fine

Adjusts the pitch of the main modulator’s wave.

❏ Settings: –50~0~+50

■Sub Pitch

Sets the pitch of the sub modulator’s wave in ca.

semitones, at a ratio to the main modulator’s wave

pitch. A setting of “0” produces a frequency of “0,”

while when set to “127,” the pitch of the sub

modulator wave becomes equal to the one of the

main modulator’s wave pitch.

❏ Settings: 0~127

■K.Flw Coarse (KeyFollow Coarse)

Sets the KeyFollow for the Pitch Coarse. The

KeyFollow Coarse function controls the pitch of the

modulation wave form in accordance with the notes

played on the keyboard. When set to “+32,” the

KeyFollow functions at 100% and the change in the

pitch of the modulation wave moves in proportion to

the pitch played on the keyboard. When set to a

value of “0” the pitch of the modulation wave is

fixed.

❏ Settings: –32~0~+64

■K.Flw Fine (KeyFollow Fine)

Sets the KeyFollow for the Pitch Fine to finely

adjusts the KeyFollow Coarse function.

❏ Settings: –64~0~+63

Main

OSC Sub

OSC

PEG depth

RingMod RingMod

MainEGDepth SubEGDepth

Main freq.-coarse/ Sub freq. -coarse/fine

(fixed)

Input Output

EG mode

Time

Sub pitch

Pitch

coarse/fine

ModDepth

fine (fixed)

Main Sub

Voice/E.qx 5/21/98 11:31 AM Page 138