Features and functions

To activate the no-wake mode:

TIP:

The no-wake mode cannot be activated immediately after starting the engine. After starting the engine, wait for 5 seconds or more before activating the mode.

(1)Release the throttle lever.

(2)Check that the shift lever is in the forward position.

1

2

1Shift lever

2Forward position

TIP:

The no-wake mode cannot be activated when the shift lever is in the reverse position.

(3)Push and hold the “NO-WAKE MODE” switch. When the no-wake mode is acti- vated, the beeper sounds three times quickly and “5” (when miles are selected) or “8” (when kilometers are selected) starts flashing in the digital speedometer display. Keep the throttle lever in the idle position when the no-wake mode is acti- vated.

TIP:

The digital speedometer display flashes continually while the no-wake mode is activated.

1

1“NO-WAKE MODE” switch

To deactivate the no-wake mode:

Perform one of the following procedures. The beeper sounds two times quickly and the digital speedometer display stops flashing when the no-wake mode is deactivated.

●Push the “NO-WAKE MODE” switch.

●Squeeze the throttle lever.

TIP:

The no-wake mode is also deactivated when the engine is stopped.

EJU37022

Cruise assist

The cruise assist is a function for maintaining a desired engine speed within a fixed range while operating the watercraft.

42