|
| Operation |
tween the minimum and maximum level (5) | Remove the engine oil filler cap. | |
marks. |
|
|
|
| 1 |
| 1 |
|
| 1 Engine oil filler cap | |
1 Dipstick | (6) | Pour engine oil into the filler hole. Wait |
|
approximately 5 minutes until the engine oil settles.
2
1
TIP:
The difference between the minimum and maximum level marks on the dipstick is equal to approximately 1 liter of engine oil.
(7)Repeat steps
(8)Install the engine oil filler cap, and then
install the seats.
1Maximum level mark
2Minimum level mark
(4)If the engine oil level is below the mini- mum level mark, perform steps
EJU32420
Water separator
Check the water separator for water. The water separator retains any water that may have entered through the fuel tank breather hose if the watercraft was capsized. Normally, the water separator is empty.
1
2
1Water separator
2Drain screw
62