96 En
Customizing this unit (MANUAL SETUP)
Use this menu to adjust the optional system parameters.
■Display settings A)DISPLAY SET
Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set “OSD
SHIFT” to the factory presets (see page 109).
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press 8l to make the front panel display dimmer.
• Press 8h to make the front panel display brighter.
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
• Press 8l to lower the position of the OSD.
• Press 8h to raise the position of the OSD.
Source feature OSD display time OSD-SOURCE
Use this feature to set the amount of time to display the
XM Satellite Radio information, SIRIUS Satellite Radio
information, or iPod menu in the OSD after you perform a
certain operation.
Amplifier function OSD display time OSD-AMP
Use this feature to set the amount of time to display the
status information screen after you perform a certain
operation.
Front panel display scroll FL SCROLL
Use this feature to set the mode to display the XM
Satellite Radio information, SIRIUS Satellite Radio
information, or iPod menu (such as song title or channel
name) in the front panel display.
5 OPTION MENU
Note
[]/[]:
[ENTER]:
[
p
5 OPTION MENU
A)DISPLAY SET
B)VIDEO SET
C)MEMORY GUARD
D)INIT. CONFIG
E)HDMI SET
F)ZONE2 SET
Up/Down
Enter
.
[]/[]:
[p]/[[]:
[
p
A)DISPLAY SET
DIMMER;;;;;;;;;;;;0
OSD SHIFT;;;;;;;;+5
OSD-SOURCE;;;;;;30S
OSD-AMP;;;;;;;;;30S
FL SCROLL;;;;;;CONT
Up/Down
Adjust
.
Choice Functions
ON Displays the OSD unceasingly during an
operation.
10S Turns off the OSD 10 seconds after you perform
a certain operation.
30S Turns off the OSD 30 seconds after you perform
a certain operation.
Choice Functions
ON Displays the OSD unceasingly during an
operation.
10S Turns off the OSD 10 seconds after you perform
a certain operation.
30S Turns off the OSD 30 seconds after you perform
a certain operation.
Choice Functions
CONT Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
ONCE Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.