105 En
Using multi-zone configuration
ADVANCED
OPERATION English
Operating Zone 2
Press RINPUT l / h to select the desired input
source while the ZONE2 indicator is flashing in
the front panel display.
• Select “TUNER” as the input source to use the TUNER
features in Zone 2. For details about the TUNER
operations, see “FM/AM tuning” on page 53.
• Select “XM” as the input source to use the XM
Satellite Radio features in Zone 2. For details about the
XM Satellite Radio operations, see “XM Satellite
Radio tuning” on page 57.
• Select “SIRIUS” as the input source to use the SIRIUS
Satellite Radio features in Zone 2. For details about the
SIRIUS Satellite Radio operations, see “SIRIUS
Satellite Radio™ tuning” on page 62.
• Select “V-AUX” as the input source to use iPod
features in Zone 2. For details about the iPod
operations, see “Using iPod™” on page 68.
• Select “V-AUX” as the input source to use Bluetooth
component features in Zone 2. For details about the
Bluetooth component operations, see “Using
Bluetooth™ components” on page 70.
Set Zone 2 to the standby mode
Press HZONE 2 ON/OFF to set Zone 2 to the
standby mode.
y
Press LSYSTEM OFF to set the main zone and Zone 2 to the
standby mode simultaneously.
■Controlling Zone 2 with the remote
control
Turning on Zone 2
While pressing and holding 5AMP, press
HPOWER.
Operating Zone 2
While pressing and holding 5AMP, press one of
the input selector buttons (4) to select the
desired input source of Zone 2.
JMUTE and EVOLUME +/– are available to control Zone2
with same procedure as mentioned above.
Setting Zone 2 to the standby mode
While pressing and holding 5AMP, press
ISTANDBY to set ZONE 2 to the standby
mode.
Operate the following operations after activating the Zone 2
operation mode.
Notes
POWER
AMP
While holding
down