84 En
Customizing this unit (MANUAL SETUP)
Use the remote control to access and adjust each
parameter.
y
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• If you press SPARAMETER during the “SET MENU”
operation, the “SET MENU” operation is canceled.
• Press 9RETURN to return to the previous menu level.
1Press 5AMP and then MMENU to enter
“SET MENU”.
The top “SET MENU” display appears in the OSD.
2Press 8k / n to select “MANUAL SETUP”.
3Press 8ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
4Press 8k / n repeatedly and then press
8ENTER to select and enter the desired
menu.
The following displays are examples where “SOUND
MENU” is selected.
5Press 8k / n repeatedly and then press
8ENTER to select and enter the desired
submenu.
The following display is an example where “LFE
LEVEL” is selected.
6Press 8k / n to select the desired parameter
and then 8l / h to change the parameter
settings.
•Press
8h to increase the value.
•Press
8l to decrease the value.
7Press MMENU to exit from “SET MENU”.
Using SET MENU
[]/[]:
[ENTER]:
[
p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SIGNAL INFO
Up/Down
Enter
.
[]/[]:
[ENTER]:
[
p
MANUAL SETUP
1 BASIC MENU
2 VOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
Up/Down
Enter
.
[]/[]:
[ENTER]:
[
p
3 SOUND MENU
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)EXTD SUR.
Up/Down
Enter
.
[]/[]:
[p]/[[]:
[
p
B)LFE LEVEL
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
Up/Down
Adjust
.