Yamaha III Setting EQ- and Tone-related, Parameters, HPAGE, EMID Q, BLow Gain, DMid Gain, GHigh Gain, 1Low Frequency, CMid Frequency, FHigh Frequency

Reference

Drum Kit Mode [DRUM KIT]

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

Setting EQ- and Tone-related

Parameters

[SF3] EQ-TONE

From this display, you can set the EQ related parameters and the Tone related parameters such as attack and release. This display consists of two pages, which can be called up via the Cursor [N] and [M] buttons.

The first page when the INPUT display is called up:

8 1 2 3 4 5 6 7

The first page when the SOURCE display is called up:

8 1 3 5 6

2 4 7

The first page when the SOURCE display is called up and “MIDI” is selected:

8 1 3 5 6

2 4 7

1Low Frequency

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the center frequency of the low EQ band that is attenuated/ boosted for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the center frequency of the low EQ band that is attenuated/ boosted for each selected Trigger Input Source.

Range 50.1 – 2.00k

BLow Gain

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the amount of boost or attenuation applied to the low EQ band for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the amount of boost or attenuation applied to the low EQ band for each selected Trigger Input Source.

Range -32 – +32

CMid Frequency

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the center frequency of the middle EQ band that is attenuated/ boosted for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the center frequency of the middle EQ band that is attenuated/ boosted for each selected Trigger Input Source.

Range 139.7 – 10.1k

DMid Gain

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the amount of boost or attenuation applied to the middle EQ band for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the amount of boost or attenuation applied to the middle EQ band for each selected Trigger Input Source.

Range -32 – +32

EMID Q

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the frequency bandwidth of the middle EQ band for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the frequency bandwidth of the middle EQ band for each selected Trigger Input Source.

Range 0 – 31

FHigh Frequency

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the center frequency of the high EQ band that is attenuated/ boosted for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the center frequency of the high EQ band that is attenuated/ boosted for each selected Trigger Input Source.

Range 503.8 – 14.0k

GHigh Gain

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the amount of boost or attenuation applied to the high EQ band for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the amount of boost or attenuation applied to the high EQ band for each selected Trigger Input Source.

Range -32 – +32

HPAGE >

This appears when another page can be called up from the current page. Use the Cursor [M] or [N] button to call up another page.

82 DTXTREME III Owner’s Manual