Operation
UP
ZMU04232
4.Push the tilt support knob into the clamp bracket or pull the tilt support lever toward you to support the engine.
ECM00250
CAUTION:
Be sure to retract the trim rods completely during mooring. This protects the rods from marine growth and corrosion which could damage the power trim and tilt mechanism.
EMU28053
Procedure for tilting down
Power trim and tilt models / power tilt models
1.Push the power tilt / power trim and tilt switch “
” (up) until the outboard motor is supported by the tilt rod and the tilt sup- port lever / tilt support knob becomes free.
2.Release the tilt support lever or pull out the tilt support knob.
EWM00260
WARNING
After tilting the outboard motor, be sure to support it with the tilt support knob or tilt support lever. Otherwise the outboard motor could fall back down suddenly if oil in the power trim and tilt unit loses pressure.
5.Models equipped with trim rods: Once the outboard motor is supported with the tilt support lever, press the power trim and tilt switch “
” (down) to retract the trim rods.
3.Push the power tilt / power trim and tilt switch “
” (down) to lower the outboard motor to the desired position.
UP
DN DN
ZMU01936
33