APPENDIX
119
OMNI On: 7DH
Cntrl# Parameter Data Range
125 — 0
Same processing as for All Notes Off. (“OMNI ON” operation not supported.)
MONO: 7EH
Cntrl# Parameter Data Range
126 Mono 0 to 16
Generates “All Sound Off” operation. If the value of the third byte (mono number) is 0~16,
the channel changes to Mode 4 (m=1).
POLY: 7FH
Cntrl# Parameter Data Range
127 — 0
Generates “All Sound Off” operation, and sets the channel to Mode 3.
6. Channel Aftertouch
Status: DnH
The message is not effective under initial settings.
If multi part parameter “Rcv CHANNEL AFTERTOUCH” is Off, the part ignores this
message.
7. Polyphonic Aftertouch
Status: AnH
The message is not effective under initial settings.
If multi part parameter “Rcv POLYPHONIC AFTERTOUCH” is Off, the part ignores this
message. It is not necessary for the effect to apply to all note numbers (0~127).