Yamaha MU50 - page 36

GUIDED TOUR
27
Operation
1Set the HOST SELECTHOST SELECT
HOST SELECTHOST SELECT
HOST SELECT switch to PC-2PC-2
PC-2PC-2
PC-2.
2Connect the MU50 to the host computer, as shown in the illus-
tration above. Use a standard computer cable (8-pin Mini DIN
to 9-pin D-SUB; see page 31).
3Turn on the the host computer, then the MU50.
4Start up your music software, and set up the appropriate options
on the software for operation with the MU50.
Refer to the owner’s manual of your particular music software for more in-
formation.
Connecting to Other MIDI Devices
The MU50 is equipped with MIDI IN and OUT terminals, allowing you to use
it in any MIDI system. Example uses for the built-in MIDI interface include:
☛Connecting to a MIDI keyboard (for playing the sounds of the MU50
from that keyboard).
☛Connecting to a computer equipped with a MIDI interface (either in-
ternal or external).
☛Connecting to a hardware sequencer (such as the Yamaha QY300).
☛Connecting to a MIDI data storage device (such as the Yamaha MDF2
MIDI Data Filer).
Sequencer
MIDI OUT MIDI IN
MIDI CABLE