Yamaha NP-30, YNP-25 Before Using

Before Using

NP-30/YNP-25 Owner’s Manual 11

Before UsingBe sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recom-mends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources.

Using an AC Power Adaptor...............................................................

1. Make sure that the [STANDBY/ON] switch

of the instrument is set to STANDBY.WARNING

Use the speciﬁed adaptor (PA-5D, PA-150, or an equivalent recom-

mended by Yamaha) only. The use of other adaptors may result in

irreparable damage to both the adaptor and the instrument.

2. Connect the AC adaptor to the power sup-

ply jack.

3. Plug the AC adaptor into an AC outlet.

CAUTION

Unplug the AC Power Adaptor when not using the instrument, or

during electrical storms.

CAUTION

Even when the instrument is turned off, electricity is still ﬂowing to

the instrument at the minimum level.

When you are not using the instrument for a long time, make sure

you unplug the AC power adaptor from the wall AC outlet.

unlit

AC outletAdaptor

3.

2.

Contents

Main NP-30/YNP-25 Owners Manual SPECIAL MESSAGE SECTION WARNING: SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: FCC INFORMATION (U.S.A.) Entsorgung leerer Batterien (nur innerhalb Deutschlands) OBSERVERA! IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Do not open * Please keep this manual in a safe place for future reference. WARNING Connections NP-30/YNP-25 Owners Manual 5 Maintenance Handling caution PRECAUTIONS Introd uction Main Features About this Owners Manual Accessories Owners Manual Quick Operation Guide Music Rest Table of Contents Introduction Reference Appendix Application Index Panel Controls and Terminals Before Using Before Using Be sure to do the following operations BEFORE turning on the power. 2. 3. Power Requirements 1. located on the instruments bottom panel. 2. careful to follow the polarity markings on the side of the compartment. 3. Setting the Volume Using the Pedal Using Headphones Music Rest Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of the voices. 4. 3. 1. Listening to the Piano Preset Songs To continue playing other songs, see step 1 above. AA 2. WW Using the Metronome 1. button to turn on the metronome. 2. button to stop the Metronome. Selecting & Playing Voices Selecting & Playing Voices Selecting Voices 1. press one of the C1A1 keys to select a voice. Pressing the VOICE/SONG [BACK<<] or [>>NEXT] button switches among the following ten voices. 1. 2. Adding Variations to the Sound Reverb Transposition Fine tuning of the Pitch Touch Sensitivity Connecting MIDI Instruments Connecting MIDI Instruments Transferring MIDI data to and from a computer Connecting MIDI [IN] [OUT] terminals MIDI [IN] [OUT] terminals Use MIDI cables to connect external MIDI devices to these connectors. Connecting a Personal Computer MIDI Functions MIDI Functions W hile holding down the You can make detailed adjustments to MIDI settings. MIDI Transmit/Receive Channel Selection of the C1E2 keys. Program Change ON/OFF Control Change ON/OFF Troubleshooting Troubleshooting Optional Equipment Problem Possible Cause and Solution MIDI Data Format Appendix 1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] Data format: [8nH] -> [kk] -> [vv] (reception only) NP-30/YNP-25 Owners Manual 29 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] 5. Pitch Bend Change (reception only) 6. SYSTEM REALTIME MESSAGES NP-30/YNP-25 Owners Manual 10. ll Data format: 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) Effect MIDI Map MIDI Implementation Chart Page Specications Index CANADA U.S.A. MEXICO BRAZIL NORTH AMERICA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST ASIA