E

Procedure

1)Remove the top cowling.

2)Remove the flywheel cover by remov- ing the bolts.

208051

000293

OFF ON START

3)Prepare the engine for starting. See “STARTING ENGINE” for procedures. Be sure the engine is in Neutral and that the lanyard is attached to the engine stop switch.

The main switch must be on if the main switch is equipped on the elec- tric start model.

NOTE:

Prime start model

If the engine will not start with this proce- dure, refer to “ENGINE FAILS TO OPER- ATE”.

701024

4) To start the engine with emergency starter rope, insert the knotted end of the rope into the notch in the flywheel rotor and wind the rope several turns clockwise. Then, give a strong pull straight out to crank the engine. Repeat if necessary.

208052

5-7