Preparation Procedure
10
■Telephone circuit: Setting the telephone
circuit type
To have communications through the telephone circuit, it
is necessary to set the type of the connected telephone
circuit.
1Press repeatedly until the initial display
appears.
2Press .
The menu screen appears.
3Press or to select “Settings”, and then
press .
The “Settings” menu appears.
4Press or to select “Phone”, and
press .
The “Phone” menu appears.
5Press or to select “Dial Type”, and
press .
The “Dial Type” menu appears.
6Press or to select the type of your
telephone circuit, and press .
•20PPS: Select when your telephone circuit is a
pulse (20 pps) line.
•10PPS: Select when your telephone circuit is a
pulse (10 pps) line.
•Pb (Default): Select when your telephone circuit is
a tone line.
y
• In general, “20PPS” is applicable to most pulse lines.
• If you do not know the type of your telephone circuit,
consult your telephone company.
7Press or to select “Country Code” and
press .
THe “Country Code” menu appears.
8Press or to select the country use this
unit , and press .
9Press repeatedly until the initial display
appears.
3. Online
2. Call History
1. Settings
Menu
3. Sound Settings
2. Phone
1. Network Settings
Settings
3. Line Echo Cancel
2. Hooking Time
1. Dial Type
Phone
3. Pb
2. 10PPS
1. 20PPS
Dial Type
3. Germany
2. China
1. Canada
Country Code