Yamaha PJP-50R - page 24

Setting the Menu List

CONFIGURATIONS

English

■Configuring the external input/output

setting

You need to configure this setting when you connect an

external audio equipment to this unit.

•None: Usually select this setting.

•Audio (Default): Select this setting when connecting

external audio equipment to this unit. This setting is

indicated on the initial display.

•Connection(mstr): Select this setting for the PJP-50R

to be used as the Master unit. This setting is indicated

on the initial display.

•Connection(slv): Select this setting for the PJP-50R to

be used as a Slave unit. This setting is indicated on

the initial display.

Using the keys on this unit

In the initial display, select “Menu” → “Settings” →

“Sound Settings” → “External I/O”.

Using the Web menu

In the Web menu, select “External Input/Output”.

• In an interlocked connection of the ProjectPhone systems, allow

a distance of at least 2 meters between them.

• Set the “Room Size” to “Small” for an interlocked connection.

• When connecting three ProjectPhone systems (Master, Slave 1

and Slave 2) in an interlocked connection, first connect the

AUDIO OUT terminal of the Master unit to the AUDIO IN

terminal of the Slave 1 unit. And then, connect the AUDIO

OUT terminal of the Slave 1 unit to the AUDIO IN terminal of

the Slave 2 unit. Finally, connect the AUDIO OUT terminal of

the Slave 2 unit to the AUDIO IN terminal of the Master unit.

See “Interlocked Connection of ProjectPhone Systems”

(page 29) for details.

■Configuring the codec

At the beginning of communication, this system

negotiates with the remote communication terminal and

selects the optimum encoding method automatically

according to the encoding method usable by the remote

terminal.

This menu item is used to determine the range of encoding

methods that can be selected by this system.

For example, when this system wants to communicate

with an audio conference system other than the

ProjectPhone system and the system is not compatible

with the G.711 extended encoding method, select

“G.711”. If this is selected, this unit selects the optimum

encoding method from G.711 µ-law, G.711 A-law and

G.726-32 methods according to the compatibility of the

remote party.

• G.711 Extension (Default)

•G.711

•G.726-32

See “Specifications” (page 46) for details about the

frequency response and the transmission bandwidth for

each codec.

Using the keys on this unit

In the initial display, select “Menu” → “Settings” →

“Sound Settings” → “CODEC”.

Using the Web menu

In the Web menu, select “CODEC”.

■Adjusting the volume

The audio input volume from the microphones and the

audio input/output volumes from/at the AUDIO IN/OUT

terminals can be adjusted.

•Microphone: Adjustment of the input volume from the

microphones of the system.

•Audio IN: Adjustment of the input volume from the

AUDIO IN terminal.

•Audio OUT: Adjustment of the output volume at the

AUDIO OUT terminal.

Using the keys on this unit

In the initial display, select “Menu” → “Settings” →

“Sound Settings” → “Volume Fine Adj”.

•Use and to adjust each volume and to confirm the

adjustment.

• Adjustment range: –12.0 dB to 12.0 dB (0.5 dB steps)

• Initial setting: 0 dB

Varying the volume settings may distort audio in certain operating

environments. In this case, reduce the volume setting until the

distortion disappears.

■Natural Voice Enhancer feature

Natural Voice Enhancer feature enhances the high-

frequency fidelity of the audio signals input via telephone

circuit or IP network. This unit outputs the improved

sound from the speaker of this unit.

•Enable: Select to activate the Natural Voice Enhancer

mode.

•Disable (Default): Select to deactivate the Natural

Voice Enhancer mode.

Using the keys on this unit

In the initial display, select “Menu” →“Settings”

→“Sound Settings” →“Voice Enhancer”.

Using the Web menu

In the Web menu, select “Natural Voice Enhancer”.

■This setting does not affect the audio signals input at the

AUDIO IN jack.

MIC MUTE

VOL

MIC MUTE

VOL

Note

MIC MUTE

VOL

MIC MUTE

VOL