98
Data Backup & Initialization
■Data Backup
Except for the data listed below, all PSR-530 panel settings are reset to their initial
settings whenever the power is turned on.
• Registration Memory
• User Song Data
• User Style Data
• User Pad Data
• MIDI Transmit Settings
• MIDI Receive Settings
The data listed above can be backed up — i.e. retained in memory — as long as a
working set of batteries is installed and you keep the following Off/On procedure.
zTurn the power OFF by pressing the [STAND BY/ON] switch.
xUnplug the DC output cable of the PA-6 from the DC IN 10-12V jack on the rear
panel of the PSR-530.
cThen unplug the PA-6 Power Adaptor from the wall AC outlet.
When turning the power ON, simply reverse the procedure.
■Data Initialization
All data can be initialized and restored to the factory preset condition by turning on the
power while holding the highest (rightmost) white key on the keyboard. “CLr:Back up”
will appear briefly on the display.
• All registration and
song memory data,
plus the other set-
tings listed above,
will be erased and/or
changed when the
data initialization
procedure is carried
out.
• Carrying out the
data initialization
procedure will usu-
ally restore normal
operation if the PSR-
530 freezes or be-
gins to act errati-
cally for any reason.
ON
STAND BY
CLr
Back up