108
6Record
Recording will begin as soon as you play a note on the keyboard (synchro
start) or press the [START/STOP] button, and the BEAT indicator dots will
begin to indicate the current beat as in the Auto Accompaniment mode. If you
are recording a Chord Match phrase, be sure to base your phrase on a CM7 chord
to ensure proper Chord Match operation. See page 101 for more details on
recording around a CM7 chord.
7Stop Recording
Stop recording by pressing the [START/STOP] button. When recording is
stopped, the record-ready mode will be engaged.
• Before actually starting to
record you can try playing the
PSR-730/630 the way it is set
up by using the “Rehearsal
Mode”: press the [SYNC
START] button to temporarily
disengage the record ready
mode, rehearse as necessary,
then press the [SYNC START]
button again to return to the
record ready mode.
• Whenever you record a
MULTI PAD, any previously
recorded material in the same
MULTI PAD will be erased.
• If the memory becomes full
while recording, “Full” will ap-
pear on the display and re-
cording will stop (the record-
ready mode will be engaged).
8Record Additional Pads as Required
By repeating steps 3 through 7, above, you can select and record additional
pads as required.
9Exit From the Record Mode
When you’re finished recording pads, press the [RECORD] button so that its
indicator goes out to exit from the record mode. The recorded user pad can now
be played back in the same way as the preset pads (page 61).
Multi Pad Recording
MULTI PAD
BEATMEASURE
1234
009
START / STOP
START / STOP
RECORD