114
Some of the functions in the OVERALL function group have already been described in
appropriate sections of this manual. Others will be introduced for the first time in this section.
Refer to the chart below for the page numbers on which each function is described. The chart
also lists the full name of each function, the abbreviated name which appears on the display,
and the available settings or range of settings. Ranges are indicated by two or more values
separated by ellipsis (…).
Function Display Settings Page
Touch Sensitivity TouchSense 0 … 127 115
Pitch Bend Range PB Range 01 … 12 54
Master Tuning Tuning –50 … +50 115
Scale Tuning Note S.TuneNote C … B 115
Scale Tuning S.TuneValue –64 … 63 115
Song Transpose SongTrans –12 … +12 116
Metronome Metronome Off, On 116
Split Voice Split Point SplitPoint 0 … 127 21
Accompaniment Split Point AcmpSplit 0 … 127 30
Fingering Mode FingerMode Multi,Single, 31
Fingered1, Fingered2,
Full Key, Multi
Voice Set VoiceSet Off, On 116
Pedal1 Pedal1 Sustain … 117
Groove&Dyn.
Pedal2 Pedal2 Expression … 117
Groove&Dyn.
Pedal1 Polarity P1 Polarity Normal, Revers 118
Pedal2 Polarity P2 Polarity Normal, Revers 118
Modulation Wheel ModWheel Modulation, 55
Brightness,
Resonance
To access an OVERALL function first use the MENU [▲] and [▼] buttons to move
the triangular indicator in the display next to “OVERALL”.
Then use the SUB MENU [▲] and [▼] buttons to select the desired function from
within the OVERALL menu. When a function is selected the current setting will
appear to the right of the function name on the top line of the display. Once the function
has been selected, use the [–] and [+] buttons or data dial (or number buttons, where
applicable) to set the function as required.
Overall Functions
GROOVE&DYNAMICS
MENU
MIDI
DIGITAL EFFECT
OVERALL
SUB MENU
se: 100TouchSen