A p p e n d i x
234
● MIDI
MIDI Data Error This will appear when the received QY bulk data contains
an error.
Now Running This will appear when the QY70 is receiving bulk data.
Other MIDI signals cannot be received at this time.
MIDI Buffer Full This will appear when the MIDI reception buffer of the
QY70 has filled up, and processing was not possible. Try
decreasing the amount of data or increasing the interval
time and transmit the data once again.
XG Data Error This appears when the received XG parameter change
contains a data size error
XG Adrs Error This appears when the received XG data contains an
address error.
XG Size Error This appears when the received XG bulk data contains a
data size error.
Checksum Error This appears when the received XG data contains a
Checksum error.
Host is OffLine If the QY70 is connected to a computer, this appears
when the computer’s power is switched OFF. Switch the
computer’s power ON.
● Messages other than error messages
Can’t Undo OK? (Yes/No)
If executing a job would fill up the internal memory so
that Undo will not be available, this message will appear.
If you are sure that you will not need to Undo this job,
press “YES”. To cancel without executing the job, press
“NO”.
Are You Sure? (Yes/No)
Before an operation is executed, this message will ask
you for confirmation. To execute the operation press
“YES”. To cancel the operation press “NO”.
Completed This will appear when the current process has been
completed.
Executing... This message will appear while the job is being executed.
Please wait.
Transmitting... When transmitting MIDI bulk data, this message will
appear.
Receiving... When receiving MIDI bulk data, this message will appear.