31 En
BASIC SETUP
PREPARATION
10 Press j / i to select the desired setting.
Choices: YES, NO
Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
Select “NO” to proceed to the speaker level
adjustment menu in step 12 to balance the output
level of each speaker.
11 Press ENTER to confirm your selection.
If you selected “YES” in step 10, the setup
procedure is completed and the display returns to
the top “SET MENU” display.
If you selected “NO” in step 10, the speaker level
adjustment display appears in the front panel
display.
12 Press u / d to select a speaker and then j / i
to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
•Press i to increase the value.
•Press j to decrease the value.
Select “FR” to adjust the balance between the front
left and right speakers.
Select “C” to adjust the balance between the front
left and center speakers.
Select “SL” to adjust the balance between the front
left and surround left speakers.
Select “SB” to adjust the balance between the
surround left and surround back speakers.
Select “SR” to adjust the balance between the
surround left and surround right speakers.
Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.
13 Press SET MENU to exit from “BASIC
SETUP”.
;BASIC SETUP
ROOM: S >M L
SUBWOOFER;;;;YES
SPEAKERS;;;;6spk
SETUP:>OK CANCEL
.CHECK OK?;;;;YES
[<]/[>]:Select
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH

.FR;;;;;;;;;;
 C;;;;;;;;;;
SL;;;;;;;;;;
;BASIC SETUP
-__________+
MENU
SET MENU
SRCH MODE