66 En
DAB (DIGITAL AUDIO BROADCASTING) TUNING
If the initial scan operation was not successful, “Not
Available” appears in the front panel display. In such cases,
press A/B/C/D/E on the front panel (or u / d on the remote
control) to start “INIT SCAN” automatically.
y
• You can cancel the initial scan operation in the middle by
pressing RETURN on the remote control. When
“BREAK?[ENTER]” appears in the front panel display,
press ENTER on the remote control to return to “INIT
SCAN”.
• For further details about problems and their proper
remedies, see the “Tuner” section in
“TROUBLESHOOTING” on page115.
Tuning aid B)TUNE AID
Use this feature to display the strength of the current DAB
signals in the front panel display. You can use this feature
to adjust the positioning of the DAB antenna and this unit.
It is recommended that you perform this operation when
setting up this unit in order to maximize the DAB
reception capability.
1Press u / d to select “TUNE AID” in “DAB
MENU”, and then press ENTER.
For details, see “Using DAB MENU” on page64.
The signal strength level of the selected DAB channel
appears in the front panel display.
Display status: 0 (none) to 100 (best)
2Press j / i to switch between channel labels.
y
For a complete list of channel labels, see “DAB frequency
information” on page122.
3Press ENTER.
This unit returns to the “TUNE AID” menu.
Note
A/B/C/D/E
ENTER
PRESET/CH
A/B/C/D/E
ENTER
PRESET/CH
DVR DVD CD
V-AUX DTV/CBL
MD/CD-R
p
TUNER
DAB
VOLUME
PCM
A
SP
dB
LR
5A LEVEL: 80
NET
USB
Signal strength levelSelected DAB
channel label
A/B/C/D/E
ENTER
PRESET/CH
5B LEVEL: 40
A/B/C/D/E
ENTER
PRESET/CH
B)TUNE AID