CONTROLS AND FUNCTIONS
7 En
INTRODUCTION
0TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
ASTANDBY
Sets this unit to the standby mode (see page28).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
BPOWER
Turns on this unit (see page28).
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
CSLEEP
Sets the sleep timer (see page35).
DMULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page38).
EVOLUME + /–
Increases or decreases the volume level.
FComponent selector switch
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates this unit.
SOURCE
Operates the component selected with an input
selector button (see page97).
TV
Operates the TV assigned to either DTV/CBL or
(see page96).
• To set the remote control codes for other components, see
page98.
• When you set the remote control codes for both DTV/CBL and
(see page98), priority is given to the one set for DTV/
CBL.
GMUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page34).
HSTRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page39).
INIGHT
Turns on or off the night listening modes (see page34).
JSET MENU
Enters “SET MENU” (see page81).
KDISPLAY
Selects the on-screen display (OSD) mode for your video
monitor (see page41).
LNetwork and USB input selector buttons
Select the sub input source of NET/USB (see page106).
PC/MCX
Selects a PC server or YAMAHA MCX-2000 as the
sub input source of NET/USB.
NET RADIO
Selects the Internet radio as the sub input source of
NET/USB.
USB
Selects a USB memory device or a USB portable
audio player as the sub input source of NET/USB.
• Press NET/USB to select “NET/USB” as the input source
before you press any of the network and USB input selector
buttons stated above to select the corresponding sub input
source of NET/USB.
• When you press any of the network and USB input selector
buttons, the contents previously played for the corresponding
sub input source of NET/USB is automatically played.
MRadio Data System tuning buttons
FREQ/TEXT
Switches the Radio Data System display between the
PS mode, PTY mode, RT mode, CT mode (if the
station offers the corresponding data services) and the
frequency display (see page56).
PTY SEEK MODE
Sets this unit to the PTY SEEK mode (see page53).
PTY SEEK START
Starts searching for a station once the desired program
type is selected in the PTY SEEK mode (see page54).
EON
Selects a program type (NEWS, AFFAIRS, INFO, or
SPORT) for automatic tuning (see page55).
Note
Note
Notes
Notes