PRESET TUNING

MANUAL PRESET TUNING

This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be stored.

2, 1 4, 2 (Preset station buttons)

3

To store stations

1 Tune to a desired station.

(Refer to the previous page for tuning procedure.)

2 Select a desired page (A – E) of preset station buttons while watching the display.

A/B/C/D/E

PRESET

3

MEMORY

MEMORY

FM

Flashes on and off for about 5 seconds.

4 Press a preset station button before “MEMORY” goes off from the display.

l

2

3

PRESET STATIONS

6

7

8

4

5

PRESET

STEREO

 

 

FM

MHz

 

 

l00 REAR

 

 

0

20

AUTO TUNING

Shows the displayed station has been programmed to A1.

*In the same way, program other stations to A2, A3 ... A8.

*You can program more stations to the preset station buttons on other pages in the same way by selecting other pages in step 2.

To recall a preset station

1 Select the page of preset station buttons.

A/B/C/D/E

PRESET

2 Select the desired preset station button.

l

2

3

PRESET STATIONS

6

7

8

4

5

PRESET

Notes

●A new setting can be programmed in place of the former one.

●For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency.

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the PRESET TUNING steps.

20