By designating a program type, the unit automatically searches all preset stations for RDS stations of that program type. * There are 15 program types to classify RDS stations. For details, refer to page 23.
1
2
4 | 3, 5 |
1 Turn the unit into the PTY mode.
PS/PTY SEEK |
|
FREQ/PS/PTY | Press once or twice until a |
| program type is displayed |
| or “NO PTY” flashes. |
*If “NO PTY” flashes, proceed to the next step while flashing. If “NO PTY” disappears before you proceed to the next step, press the FREQ/PS/PTY button once or twice.
2 SHIFT
The program type of the station now being received or “NEWS” flashes on the display.
3 Select the desired program type.
DOWN TUNING UP
*By pressing the TUNING button repeatedly or by pressing and holding it, the display will change program types in sequence.
4 When the desired program type appears, press the ENTER button.
ENTER
ENTER
Flashes.
5
DOWN TUNING UP
Press once.
The unit begins searching all preset stations, and calls a station of the program type if such a station is found.
*When the right side of the TUNING button is pressed, the search is performed from “A1” toward higher numbers of the preset stations (A1, A2 ... A8, B1, B2, ...). If, however, “A3” is currently being called for example, the search begins from the next station “A4”.
When the left side of the TUNING button is pressed, the search is performed in reverse order.
If the called station is not the desired one, press the TUNING button again to search for another station of the same program type.
To cancel this function
Press the FREQ/PS/PTY, SHIFT, ENTER, FM/AM or
MEMORY button.
26