Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear speakers even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 15.

Lights up.

REAR LEVEL

REAR

Adjustable

By continuously pressing “+” or “–” on theREAR LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the preset point (80).

●Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

●If DOLBY PRO LOGIC or a digital sound field program is not used, the REAR LEVEL control will not function.

Adjustment of DELAY TIME

You can adjust the time difference between the beginning of the source sound and the beginning of the effect sound with the DELAY TIME control.

The DELAY TIME control is effective with all programs. By applying more or less delay, sound effects, background noise, and ambient noise coming at you from the rear speakers can be enhanced or subdued for extra effect.

By continuously pressing “+” or “–” on theDELAY TIME control, the value changes continuously.

However, the value stops changing momentarily at the preset point.

1. PRO LOGIC : from 15 to 30 milliseconds (Preset value: 20 milliseconds)

2. PRO LOGIC : from 15 to 30 milliseconds

ENHANCED (Preset value: 20 milliseconds)

3.CONCERT VIDEO : from 1 to 100 milliseconds (Preset value: 28 milliseconds)

4.MONO MOVIE : from 1 to 100 milliseconds

 

(Preset value:

20 milliseconds)

5. STADIUM

: from 1 to 50 milliseconds

 

(Preset value:

45 milliseconds)

6. DISCO

: from 1 to 100 milliseconds

 

(Preset value:

14 milliseconds)

7.ROCK CONCERT : from 1 to 100 milliseconds (Preset value: 17 milliseconds)

8.CONCERT HALL : from 1 to 100 milliseconds (Preset value: 30 milliseconds)

DELAY TIME

Adjustable

 

STEREO

DELAY

 

0 20 l00

ms

ONCERT

 

VIDEO

 

Note

Adding too much delay will cause an unnatural effect with some sources. Experiment with the DELAY TIME control to create the effect that you find most suitable.

Note

The values of the DELAY TIME, CENTER LEVEL and REAR LEVEL you set the last time will remain memorized even when the power of this unit is off.

However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings.

30